2.1 Understanding the keypad indicators
For the location of the indicators please see Figure 1: The Keypad.
Power Indicator
Green
Mains power is connected to the panel and is functioning correctly.
There are no fault conditions.
Red
A fault condition has occurred. This could be loss of mains power, low
battery or other system fault. Refer to section 12.1 for troubleshooting.
Home 1 and Home 2 Indicators
Green
You are viewing the profile that is illuminated green and the zone
indicators will show the status of the zones in this profile.
Flashing
Orange
The home profile is in entry/exit delay mode, and will shortly arm.
Red
The system in armed in the Home 1 or Home 2 profile.
Partition (P) Indicators
Bright
Green
This is the active partition and it is ready to arm. The zone
indicators for the zones belonging to this partition will be
displaying their status.
Dim
Green
The partition is available, but is not the active partition you are
viewing. To view this partition, touch the [P] key and it will turn
bright green.
Orange
Not ready to arm. A zone is violated.
Red
The partition is armed.
Flashing
Orange
This partition is in entry/exit delay mode, and will shortly arm.
Zone Indicators
Extinguishe
d
Not violated.
Flashing
Violated zone.
Illuminated The zone is bypassed.
By default LEDs 1-16 display zones 1-16- however this may be programmed
per partition. Please speak to your installer to see how they have set up your
zone indicators.
2.2 Operating the Keypad
The function of your keypad: