5
Installation
T
O BE INSTALLED ON COLD WATER SUPPLY ONLY
T
URN OFF MAINS WATER SUPPLY BEFORE STARTING
INSTALLATION
W
HEN CUTTING TUBING TO SIZE
,
ENSURE THAT IT IS CUT
STRAIGHT WITH NO JAGGED EDGES
Fitting type:
1. Quick-Connect (QC) fitting:
How to connect
– See Fig. 3. Remove collet clip, insert tubing
into fitting until it locks. Gently pull tubing back to ensure fit is
secure. Re-place collet clip.
How to disconnect
– See Fig. 4. Remove collet clip, push
down on collet so it is completely flush with the fitting and pull
tubing simultaneously.
