2
General Information
T
O BE INSTALLED ON COLD WATER SUPPLY ONLY
T
URN OFF MAINS WATER SUPPLY BEFORE STARTING
INSTALLATION
P
LEASE CAREFULLY READ THROUGH MANUAL BEFORE
INSTALLING SYSTEM
.
P
LEASE KEEP THIS MANUAL IN A SAFE PLACE
.
I
NSTRUCTIONS
ARE INCLUDED FOR FILTER CHANGES
P
LEASE NOTE THAT
RO
SYSTEMS REQUIRE A MINIMUM OF
3
BAR
(45
PSI
)
PRESSURE TO WORK
.
T
HE HIGHER THE PRESSURE
THE BETTER THE PERFORMANCE WILL BE
.
O
PTIMAL
PRESSURE
:
5.5
BAR
(80
PSI
)
(B
OOSTER
P
UMP
K
ITS CAN BE PURCHASED ON OUR WEBSITE
)
Our reverse osmosis system will remove more than 96% of: foreign
particles, colloid, organic substances, heavy metals, soluble solids,
bacteria, viruses, pyrogen, nitrate, microorganisms, hormones,
Fluoride and other harmful impurities. It only retains water molecules
and dissolved oxygen.
To achieve this, RO systems use a special kind of semi-permeable
membrane. This membrane is protected by pre-filters, these remove
sediment, particulates and Chlorine. The membrane has layers of
filtration which the water is pushed through, any water that does not
go through all the layers is expelled to the waste line leaving only the
pure filtrated water. RO units waste around 70% of the water and will
get the TDS down to around 10-15% of the incoming TDS readings.
The 4th stage unit with a post DI filter will remove the remaining ions
in the water to get (or as close as possible) to 0 TDS.
This is an Aquatic Unit and is not recommend for drinking water.
