http://en.fineart-light.com
- 14 -
Figure 9
base and turn the two levers a full 1/4 turn clockwise to lock.
Install the second clamp.
4. If the truss can be lowered, fixtures can be clamped on directly
from flight case. If the fixture must be lifted, block should be put
under the working area. Working safely from a stable platform,
hang the fixture on the truss with the arrow towards the area to be
illuminated. Tighten the rigging clamps.
5. Install a safety wire that can bear at least 10 times weight of the
fixture. The attachment is designed to fit a clamp.
6. See to it that the horizontal and vertical locks have been unlocked.
Ensure there are no explosive or inflammable materials 1 meter
around the fixture.
Controlling panel
LCD control panel is used to set the address and particular features.
DMX address and setting
The DMX address named as the start channel, it is used to receive
instructions from the controller, and it is an independent control. If two
fixtures working in the same way, address sharing can be useful for
diagnostic purposes and synchronous control, particularly when
