http://en.fineart-light.com
- 13 -
Rigging
FINE 2000/2500 BEAM can be stamped to a truss in any orientation.
The fast-lock system enables quick and easy fastening of the clamp
brackets in 4 positions as shown in Figure 8.
Figure 8: Clamp bracket positions
Warning
！
Warning! Always use 2 clamps to fix the fixtures. The 1/4 turn
fasteners lock in position when turned fully clockwise. The fasteners
are locked only when turned fully clockwise. Attach an approved
safety wire to the attachment hole in the base. Never use the carrying
handles for secondary attachment.
Clamping the fixture to a truss
1. To inspect that the truss hooks are in good condition and can bear
about 10 times the weight of the light unit. Ensure the truss or
pipe structure can bear 10 times the weight of all the equipment
including lights, truss hooks, cables and accessories.
2. Lock each clamp securely to a clamp bracket with a 12M bolt and
lock nut.
3. Install a clamp points in the base. Insert the fasteners into the
