http://en.fineart-light.com
- 11 -
FINE 2000/2500 BEAM green energy mode
The fixture provides the function of auto lowdown power consumption.
When dimmer is off or CMY filters overlapped entirely up to more than
5 seconds, amp power will low down 50%. That can prolong the lamp
life and protect the filters and save power.
Power connection
Warning!
Type Y power supply connection. If
the external flexible
cable or cord of this fixture is damaged, it shall be replaced by a
special cord or cord exclusively available from the manufacturer or his
service agent in order to avoid a hazard.
Check the transformer or ballast frequency consitensy with local
power. Wrong installation of the fixture may cause hot damage.
100/120V power supply is not applied for FINE 2000/2500M.
Important! Connecting FINE 2000 with main power supply
directly, do not connect with the dimmer machine in order to
avoid any damage to the fixture. There is a 3-pin socket supplied
by the factory, correctly connect it with power supply as following
table: yellow/green wire is for earthing, if you have more query,
please ask for help of experienced electrician.
Set base switch to“I” position when power is supplied.
Wire color
Plug
Mark
Brown
Live wire
L
Blue
None live
wire
N
Yellow
/
green
Earth wire
