FINAL SOUND FVSS-201/P DVD RECEIVER USER MANUAL vs. 1.4
30
Push TV (or another source button) for approx. 3 seconds.
When you see the LED blink, than you push in with the numeric keys the number.
Press OK
The codes are available on the Final Sound website (
) and/or in a separate
leaflet.
Control Batteries
Troubleshooting
Trying to find the solution to a problem with your equipment can be very frustrating. The
symptoms and solutions in this section will hopefully assist you in finding the correct answers. If
you have additional questions that this manual cannot answer, please contact your Final Sound
dealer or visit the Final Sound website.
General problems
No power—make sure you use an outlet that is not controlled by a wall switch.
No power—make sure you’ve plugged the unit into a working outlet or the power strip is
turned on.
Menu is displayed in a foreign language—check OSD LANGUAGE in the menu system to
make sure the language that you want is selected.
Screen saver appears on TV—press any button to remove the screen saver from the TV
screen.
DVD tray doesn’t open—try unplugging the power cord and plugging it back in. Press and hold
STOP
for approximately 3 seconds to open the tray.
DVD won’t eject—DVD cannot be ejected when the player is reading the DVD. Wait a few
seconds before ejecting the DVD.
Video problems
Make sure the TV and Final Sound DVD receiver are turned on.
Make sure the Final Sound DVD receiver is in DVD mode (press DVD on the remote control).
Make sure TV is tuned to Video Input Channel that matches the INPUT jack(s) on the TV you
used to connect the TV to the Final Sound DVD receiver.
Make sure the cables are attached securely (check your connections). You must connect
Final Sound OUTPUT jacks to a set of the TV’s INPUT jacks.
Check the P.SCAN switch on the back of the Final Sound DVD receiver. Make sure it is in the
OFF position unless you are certain your TV or projector supports progressive scan. The
components must be connected via the Y, Pb, Pr or HDMI jacks to use P.SCAN. See chapter
3 for more information.
Check the settings in the
Parental Control
menu.
HI DEF component video input has a corresponding HI DEF component video output.
Check your settings in the Final Sound DVD receiver’s set up menu specifically the video
connections. Make sure your selection in the
SAT/CABLE Video Connection
menu matches
the SAT/CABLE INPUT jack you used to connect the video originating from the set-top box or
TV.
