FINAL SOUND FVSS-201/P DVD RECEIVER USER MANUAL vs. 1.4
18
Video set up
TV display
Normal/PS
Normal/LB
Wide/HDTV
TV type
Multi system
NTSC
PAL
Resolution
SD interlace
720p
1080i
1080p
Video output
YPbPr
SCART (*)
Main menu
(*The US-model does not have a SCART connector)
The VIDEO SET UP
Select VIDEO SET UP and press OK. The next menu level will bring 4 options to choose
from.
Select TV DISPLAY and press OK.
Normal/PS is Pan & Scan
Normal/LB is Letterbox 4:3
Wide/HDTV is preferred for HD and HD-ready screens with a 16:9 aspect ratio
Make your preferred selection and press OK. Return to the former menu using the left
arrow key.
Select TV TYPE and press OK.
Multi system is recommended for TVs that discriminate automatically between incoming
NTSC and PAL standards. Please consult your TV’s manual.
NTSC is for NTSC-only TVs
PAL is for PAL-only TVs
Make your preferred selection and press OK. Return to the former menu using the left
arrow key.
Select RESOLUTION and press OK.
SD Interlace is recommended for standard resolution TVs.
720P is recommended for TVs with support for 720 lines of horizontal resolution,
supporting progressive scan. You need a component or HDMI connection.
1080i is recommended for TVs with support for 1080i lines of horizontal resolution,
without supporting progressive scan or when connected otherwise than HDMI or
component.
1080P is recommended for TVs with support for 1080 lines of horizontal resolution,
supporting progressive scan. You need a component or HDMI connection.
Make your preferred selection and press OK. Return to the former menu using the left
arrow key.
Select VIDEO OUTPUT and press OK.
YPBPR will route the video signal towards the component output.
SCART
(*)
will route the video signal towards the SCART output.
These video output terminals are mutually exclusive.
Make your preferred selection and press OK. Return to the former menu using the left
arrow key.
Select MAIN PAGE and press OK. This will bring you back to the main menu.
