Fimap GMG PRO, Operator Interface Manual

Page: 57 / 68

PAR. CHANGE MENU (TRACTION SETS)
<Proceed as follows to display the “PAR. CHANGE” menu:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “TRACTION” menu , see “TRACTION SETS MENU (PARAMETERS)” on page 56 .
5. Using buttons (1) and (2) ( Fig.1 ) select the "TRACTION Par. Change" screen ( Fig.2 ) and press button (3) to
confirm the display ( Fig.1 ).
2
1
1
Par. Change
2
Traction
MAX FORWARD SPEED MENU (TRACTION PAR. CHANGE)
Proceed as follows to change the "MAX SPEED FORWARD” parameter in the par. change menu:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “TRACTION” menu , see “TRACTION SETS MENU (PARAMETERS)” on page 56 .
5. Display the “PAR. CHANGE” menu , see “PAR. CHANGE MENU (TRACTION SETS)” on page 57 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "MAX SPEED FORWARD" screen ( Fig.2 ).
7. As soon as the "MAX SPEED FORWARD" screen ( Fig.2 ) is displayed, select the maximum forward speed
value that the machine can reach using the buttons (3) and (4) ( Fig.1 ).
N.B.: the selected value will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selection by pressing the button (6) ( Fig.1 ).
Traction
Par. Change
100 [%]
Max speed forward:
min:0 max:100
2
5
2 4
1 3
6
1
Page 57