PAGE / 4
Doc. P/N 8.8128.00.3
Rev. 3 / July, 2020
WARNING: Always handle the bursting disc with extreme caution. Nicks, dents, scratches or foreign material may
result in leakage or affect the burst pressure. Read the bursting disc tag completely before installing to confirm
that the size and type are correct for your system.
1.
Carefully remove the bursting disc from its packaging container.
2.
Inspect the bursting disc for damage. Look for dents, scratches or dings in the seat area or dents in the
dome of the bursting disc (See Figure 1).
3.
If foreign material is present, carefully clean the bursting disc with a solvent that is compatible with your
media.
Figure 1 - Check for damage
NOTE: Handle bursting disc holders with care. Damage to the bursting disc holder could affect the performance of the
bursting disc. Do not install or use a bursting disc that has been damaged!
1.
Carefully take the bursting disc holder apart by removing the side clips or cap screws and discard the white
shipping protector (See Figure 2).
2.
Inspect the seat area for scratches, dents, nicks or dirt. Flaws may adversely affect sealing and disc burst
pressure.
3.
If necessary, clean dust or dirt on the seat area with a solvent that is compatible with your media.
Summary of Contents for RD300 Holder
Page 17: ...Notes...
