4
FML-E3/FSL-E3 Product Installation Instructions —
P/N LS10178-002FK-E:A 03/04/2021
4.4 FIK-FSL Installation Wiring Terminals
Table 5 lists the FIK-FML installation wiring terminals.
Table 6 lists the FIK-FSL LED Indicators.
Designation
Description
J1
Plugs on to P5 (Port 1) or P6 (Port 2) of the FIK-NVCM or FIK-NIC.
U6
Top connection connects to the receiving fiber (IN). Bottom connection onnects to the transmitting fiber (OUT).
Note:
Use LC connector fiber-optic cable, single mode, up to 1310 nm (optimized for 9/125 µ). Signal loss up to 30 dB maximum
between nodes.
Table 5 FIK-FML Terminal Wiring Designations
LED # Name Color
Description
1
TX
Green Lights while data is transmitted on the Repeater.
When activity is detected, the TX light flickers and turns ON.
If no activity is detected, the TX light turns OFF.
2
RX
Green Lights while data is received on the Repeater. When activity is detected, the RX light flickers and turns
ON.
When no activity is detected, the RX light turns OFF.
Table 6 FIK-FSL LED Indicators
