D
D-4
Setting Job Overrides
N
OTE
:
If you print from an application that does support reverse order printing and/or
collation, make sure to disable these options from within the application before using
the Document Set option. Enabling reverse order printing and/or collation from
within an application and setting the Document Set option to On may produce
unexpected results.
Off
—Pages of the job are output from first to last, with all copies of the same page
grouped together.
On
—Pages of the job are output from last to first, with each copy of an entire set
collated in page order.
Media Type
The Media Type option allows you to select the type of media for loading into the
manual feed tray.
Plain Paper
—Standard bond paper from 16 lb to 28 lb (60 g/m
2
to 105 g/m
2
).
Thick Paper
—Paper heavier than 28 lb, up to 90 lb Index (163 g/m
2
).
Transparency
—Transparency sheets.
Interleaved
—Multiple transparency sheets inserted with blank, plain paper separators.
With Interleaved selected, the transparencies are fed from the bypass tray and the paper
separators are fed from the paper tray.
Coated Paper
—Special paper with binders, adhesives, and/or pigments applied to the
paper’s surface on one or both sides.
Select this setting for coated paper from 32 lb to 60 lb Cover (120 g/m
2
to 162 g/m
2
).
The paper must be fed through the manual feed tray with the grain perpendicular to
the lead edge of the sheet.
Thick Paper 2
—Any paper heavier than 90 lb index.
This setting should also be selected for coated paper greater than 60 lb up to
80 lb Cover (215 g/m
2
).
Tacking Film
—(Also known as Adhesive Drafting film) Special paper used to make
corrections to vellum type drawings.
SST
(Single-Step Transfer)—Special paper used to transfer full-color images directly
from copies or prints onto fabric or other types of materials.
Labels
—Adhesive-backed, pressure-sensitive label stock.
