Fieldpiece HG3 Field Manual Download Page 33

Page: 33 / 38

www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com www.fieldpiece.com

6 4

6 5

What's Included

•

HG3 Body

•

ATH4 Accessory Head

•

ET2W Wireless Transmitter

•

ATA1 - Dry Bulb Thermocouple

•

ATWB1 - Wet Bulb Thermocouple

•

ANC8 - Nylon Carrying Case

•

Software

•

Mini USB-USB Cable

Specifications

•

Display: 21 characters X 8 rows

•

Low battery indication: " " is displayed when the battery voltage

drops below the operating level. To prevent data corruption wait un-

til "Power Off" is cleared from the display before removing batteries.

•

Battery: AA x 6.

•

Operating environment: 0°C (32°F) to 50°C (122°F) at <70% R.H.

•

Storage temperature: -20°C (-4°F) to 60°C (140°F) to 80% R.H. with

battery removed from meter.

•

Dimensions: 210mm (8.27in) (H) x 80mm (3.15in) (W) x 30mm

(1.18in) (D)

•

Weight: approx. 400g (0.88lb) including battery.

•

DC Ranges: 500mVDC, 5VDC

•

DC Accuracy: ±(0.5%rdg+2dgts)

•

AC Range: 500mVAC (model HG2 & HG3)

•

AC Accuracy: ±(0.8%rdg+6dgts) (model HG2 & HG3)

•

Input protection: Max. 30VDC/24VAC (Use Accessory Heads Only)

•

Resolution: 0.1mV = 1 count on 500mV range; 1mV=1 count of 5V

range.

•

Wireless Range: Approximately 100 feet

•

Storage: 200 tests or 100,000 logged data points

Limited Warranty

This meter is warranted against defects in material or workmanship for

one year from date of purchase. Fieldpiece will replace or repair the defective

unit, at its option, subject to verification of the defect.

This warranty does not apply to defects resulting from abuse, neglect,

accident, unauthorized repair, alteration, or unreasonable use of the instru-

ment. Any implied warranties arising from the sale of a Fieldpiece product,

including but not limited to implied warranties of merchantability and fitness

for a particular purpose, are limited to the above. Fieldpiece shall not be liable

for loss of use of the instrument or other incidental or consequential dam-

ages, expenses, or economic loss, or for any claim of such damage, expenses,

or economic loss. State laws vary. The above limitations or exclusions may

not apply to you.

Obtaining Service

Prior to sending the meter in for repair, try taking the batteries out and

reinstalling them or replacing them. In the USA, call Fieldpiece Instruments

for one-price-fix-all out of warranty service pricing. Send Check or money

order for the amount quoted. Send the meter freight prepaid to Fieldpiece

Instruments. Sent Proof of date and location of purchase for in-warranty ser-

vice. The meter will be repaired or replaced, at the option of Fieldpiece, and

returned via lease cost transportation. Outside of the USA, please visit www.

fieldpiece.com for service contact information.

For help with the CheckMe!® switch position, contact Proctor Engineering:

Proctor Engineering

Phone: (415) 451-2480

Fax: (415) 451-2491

418 Mission Avenue

San Rafael, CA 94901

For help with the PC Software, or general How to Use questions as well

as Warranty Repair Issues contact Fieldpiece Instruments. www.fieldpiece.

com.

Summary of Contents for HG3







































Search results

Summary of Contents for HG3

Reviews:

Related manuals for HG3

Brands by name

Popular brands

Fieldpiece HG3, Field Manual

Search results

Summary of Contents for HG3

Reviews:

Related manuals for HG3

Brands by name

Popular brands