Fieldmann FZG 3001, User Manual

Page: 12 / 17

EN
COMBO GRILL 3 IN 1 USER'S MANUAL
13
Operation
For assembly you will need a suitable screwdriver and spanner.
Only use tools that are intact and suitable for the job at hand.
Select a suitable place to set up the appliance. The appliance is positioned firmly on a flat, sufficiently large
surface area. Make sure the inlet and the outlet regulator are correct and suitable for the cylinder valve and
appliance.
If the regulator is used outdoors, make sure that it is protected from atmospheric agents.
For connecting the gas cylinder, you will need a suitable spanner.
When connecting the flexible tube, make sure it is not twisted.
HOW TO CONNECT A GAS CYLINDER:
Gas Connector
Hose
Hose
Regulator
Gas Cylinder
a) When changing the gas cylinder which shall be carried out away from any source of ignition.
Position the gas cylinder at left side of your gas grill, should not be placed inside BBQ, keeping in mind that
the gas cylinder must be kept away from heat and in a safe position.
b) When ready to use your gas grill insert the regulator into the gas cylinder valve and tighten firmly.
WARNING
: Before attempting to light your gas grill you must refer to your lighting instructions and warning
/ safety precautions.
Check the hose before each use, searching for cracking, cuts or any abrasions. If the hose is found to be faulty in
any way do not attempt to use your gas grill.
When changing your gas cylinder ensures that there are no sources of ignition close by i.e. fires, cigarettes, naked
flames etc. Make sure that the appliance is switched off.
The appliance only can use liquid gas cylinder as per Technical Data Label. The gas cylinder should meet the
national requirement.