Fieldmann FZG 3001, User Manual, Page: 15 / 17

EN 16
FZG3001
Trouble shooting/Warranty
9. TROUBLE SHOOTING
Problem Possible Cause Solution
Gas leaking from cracked/cut/
burned hose. Damaged hose. Turn off gas at gas cylinder, if hoes
is cut or cracked, replace hose.
Gas leaking from gas cylinder. Mechanical failure due to resting or
mishandling. Turn off gas cylinder valve.
Gas leaking from gas cylinder
valve. Failure or gas cylinder valve from
mishandling or mechanical failure. Turn off gas cylinder valve.
Return gas cylinder to gas supplier.
Burners will not light using the
ignition system. Gas cylinder empty.
Faulty regulator.
Obstructions in burners.
Obstructions in gas hets or hose. Replace with full gas cylinder.
Have regulator checked or
replaced.
Clean burners.
Clean jets and hose.
Low flame or flashback (fire in
burner tube-a hissing or roaring
noise may be heard).. Obstructions in burners.
Obstructions in gas hets or hose
Windy conditions. Clean burners.
Clean jets and hose.
Use BBQ in a more sheltered spot.
Gas valve knob difficult to turn Gas valve jammed. Replace gas valve.
a. Turn the burner on for 15 to 20 minutes. Grease drippings will be burned off from your grill as well as your
lava rock. Ensure appliance is cold before continuing.
b. Grids should be cleaned periodically by soaking and washing in soapy water.
c. The interior surfaces of the grill housing cover should also be washed with hot, soapy water. Use a wire
brush, steel wool or a scouring pad to remove stubborn spots.
d. Periodically check the burner to see that it is free from insects and spiders which may clog the gas system,
deflecting gas flow. Ensure to clean venturi pipes on burner very carefully, make sure that there are no
obstructions. We recommend that you use a pipe cleaner to clean the venturi pipe area.
e. Any modifications of this appliance may be dangerous and are not permitted.
10. WARRANTY
Maxeda DIY BV within the warranty guarantees that the product is free from defects in material and workmanship
under normal use, if installation and maintenance instructions are followed, and normal storage (storage means
the condition where the product is not used for the intended purpose).
The warranty period begins on the date of retail purchase by the original end-use buyer. For different products
and components of products are subject to different warranty periods. On (the pack) you purchased the product
can be found in the applicable guarantee.