manualshive.com logo in svg

FIC A360 Reference and, Reference And Service Manual, Page: 65 / 187

Share
Download
FIC A360 Reference and Reference And Service Manual Download Page 65

 

Software Functional Overview 

 

3-8 

FIC A360 Service Manual 

3.3.8

 

LED Indicator 

The table below lists down the functions of the Status LED indicator: 
 

Indicator 

Function Description 

IDE accessing LED  

This LED will turn on while accessing the IDE Device. 

FDD accessing LED  

This LED will turn on while accessing the FDD Device. 

Battery Charging LED 

Turn on (Amber) – Battery is under charging mode 
Turn off – Battery full charged or no battery 

Caps Lock LED  

This LED will turn on when the function of Caps Lock is active. 

Scroll Lock LED  

This LED will turn on when the function of Scroll Lock is active. 

Num Lock LED  

This LED will turn on when the function of Num Lock is active. 

Power Status LED 

Green – System is powered on. 
Green Blinking- System is entered suspend mode. 
Amber – Battery Low. 

Mail LED  

This 

LED will turn on while Mail was arrived.

 

 

L

 

 - There LEDs will be turned off during Suspend mode. 

 

Summary of Contents for A360 Reference and




























































































































































































Reviews:

No comments