Installation and Upgrade
2.
To remove the modem module, press the locking tabs away from the sides of the module
until the module pops up. Then, remove the modem module.
3.
Reassemble the notebook components as follows:
−
Put the Mini-PCI Socket Compartment door back.
−
Replace the screw.
−
Turn the system over.
4.
Boot Windows from your hard disk and insert the disc containing the Modem driver for
Windows.
5.
Click the
Start
button and then click
Run
. In the Run dialog box, click
Browse
button
and navigate to the directory as
"\driver\Win98\MODEM\setup.exe"
where the
modem driver is located. . Please change "
Win98
" to other path named as
WinMe
,
Win2K
… to fit the operating system you are using.
6.
Click
OK
to process the installation of modem driver. Follow the instruction to finish
the installation.
7.
With
“Yes, I want to restart my computer now”
selected, click
Finish
to complete the
modem installation.
2.2.9 Installing Internal LAN Device Driver
Your notebook computer may come with an optional internal LAN, which uses the Intel
82559 chip. Please follow the procedures below for installing the LAN driver:
Installing Internal LAN for Windows 98
1.
Boot Windows 98 from your hard disk and insert the disc containing the LAN driver for
Windows 98.
2.
Click the
Start
button, then click
Settings
, and
Control Panel
. Double click
System
and
click
Device Manager
tab. Under
Other Devices,
you'll see
PCI Ethernet Controller
.
3.
Click
Refresh
button. The
Add New Hardware Wizard
will detect PCI Ethernet
Controller. Click
Next
to search for the driver.
4.
Click
Next
to continue.
5.
Tick
Specify a location
and click
Browse
button. Then, navigate to
"
\Drivers\Win98\LAN
" and click
Next
.
6.
Click
Next
to accept the updated driver for Intel 82559 Fast Ethernet LAN driver.
7.
Click
Next
to continue with LAN driver installation.
8.
Insert the disk labeled "
Windows 98 Second Edition CD-ROM
", and then click
OK
.
9.
Type
"\Win98",
then click
"OK"
.
10.
Click
Finish
to complete installation.
11.
Restart Computer to finish setting up LAN.
Installing Internal LAN for Windows Me
1.
Boot WinMe from your hard disk and insert the disc containing the LAN driver for
WinMe. The
New Hardware Found
Message box appears.
2.
You will find the message stated
searching PCI Ethernet Controller Device driver
showed in the
Add New Hardware Wizard
message box.
3.
Select
"Specify the location of the driver"
, and click
Next
.
4.
Tick on
"Specify a location box"
. Then, click
Browse
button and navigate to the LAN
FIC A360 Service Manual 2-7