FIC A360 Reference and, Reference And Service Manual, Page: 37 / 187

Outline of the A360
1-26 FIC A360 Service Manual
1.6.3 Using the Security Menu
The Security menu allows you to set the system password as well as disk-protection security.
P h o e n i x B I O S S e t u p U t i l i t y
Main Advanced Security Boot Exit
Item Specific Help
Set Supervisor Password [Enter] Supervisor Password
Set User Password [Enter] controls access to the
setup utility.
Password on boot: [Disabled]
Fixed disk boot sector: [Normal]
Diskette access: [Supervisor]
F1 Help
K‚
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
st
Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-17 BIOS Setup Security Menu
Set Supervisor Password Press Enter Supervisor Password controls access to
the setup utility.
Set User Password Press Enter User Password controls access to the
system.
Password on boot
[Disabled] / [Enabled]
Enabled password entry on boot
Fixed disk boot sector [Normal] / [Write
protect] Write protects boot sector on hard disk,
to protect against viruses.
Diskette access [User] / [Supervisor] Control access to diskette drives.
„
Set Supervisor Password
– Specifies if the system prompts you to enter a
password when entering Setup.
„
Set User Password
– Specifies if the system prompts you to enter a password
when accessing the system. The Set User Password function will be enabled once a
Supervisor password is set. Enter a new password with up to eight alphanumeric
characters, and then enter this same new password again for confirmation.
„
Password on boot
– Enables password check when booting.
„
Fixed disk boot sector
– [Write Protect] enables write protect boot sector
on hard disk to prevent against viruses. [Normal] disables this write protect
function.
„
Diskette access
– Controls access to diskette drive.