manualshive.com logo in svg

FIC A360 Reference and, Reference And Service Manual, Page: 52 / 187

Share
Download
FIC A360 Reference and Reference And Service Manual Download Page 52

 

Installation and Upgrade 

2.3.2  CPU Upgrade Procedure 

The A360 features Intel Pentium III and Celeron 

FC-PGA

 Processors. It is located on the 

upper-left side of the system motherboard. 
 

How to Access the CPU Socket 

To install or replace the CPU, follow the steps below: 
 
1.

 

Turn off the system and remove both AC adapter and the battery pack from the notebook 
unit. 

 
2.

 

Remove keyboard cover by gently bending it and sliding it towards in front of you. 

 

 

Keyboard Cover 

Bend  Up 

 

Figure 2-3 

Remove keyboard cover 

 

3.

 

Lift the keyboard and tilt it towards the LCD panel. 

 
4.

 

Release keyboard cable by sliding the ZIF connector towards up direction. 

 

  

 

Figure 2-4 

Remove keyboard 

FIC A360 Service Manual 2-13

 

Summary of Contents for A360 Reference and




























































































































































































Reviews:

No comments