34
users anD access
Default room:
New devices will be automatically assigned to the default room.
1. Open the Configuration interface.
2. Go to
>
General.
3. Set Default room (under the section: Main Sensors).
18: USERS AND ACCESS
18.1: USER ROLES
•
Admin
– only one user, can configure the system, operate devices,
add users and give them permissions.
•
User
– one or more users, can switch devices on/off, see the state
and history data of devices.
18.2: ADDING USERS
1. Open the Configuration interface.
2. Go to
>
Access
>
Users.
3. Click Add user.
4. Enter Name and E-mail (we recommend using ID) of added user and
click Next.
5. Message with local password for the new account will be sent to
entered e-mail address.
18.3: GIVING PERMISSIONS TO USER
For a new user to be able to use the gateway, admin must give it
appropriate privileges.
1. Open the Configuration interface.
2. Go to
>
Access
>
Users.
3. Click Manage Access on the user list.
4. Select sections and/or devices to give the user access to them.
5. Click Save.
18.4: MANAGING USER’S MOBILE DEVICES
1. Open the Configuration interface.
2. Go to
>
Access
>
Users.
3. Click
>
next to the user.