2021. 04. 16.
https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGD-212
https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGD-212
8/14
Setting
Description
0
function disabled
1 - 99
percentage level of brightness
Parameter 20: Switch type
Choose between momentary, toggle and roller blind switch.
Size: 1 Byte, Default Value: 0
Setting
Description
0
momentary switch
1
toggle switch
2
roller blind switch - two switches operate the Dimmer 2 (S1 to brighten, S2 to dim)
Parameter 21: The value sent to associated devices on single click
This parameter defines the value sent to devices associated with Dimmer 2 after its enabling.
Size: 1 Byte, Default Value: 0
Setting
Description
0
0xFF value is sent, which will set associated devices to their last saved state.
1
Current Dimmer state is sent, which will synchronize brightness level of associated devices (other Dimmers for
example).
Parameter 22: Assign bistable key status to the device status
By default each change of toggle switch position results in action of Dimmer 2 (switch on/off ) regardless the physical connection of conntacts.
Size: 1 Byte, Default Value: 0
Setting
Description
0
Device changes status on key status change.
1
Device status is synchronized with key status.
Parameter 23: Double click option
Size: 1 Byte, Default Value: 1
Setting
Description
0
double click disabled
1
double click enabled.
Parameter 24: Command frames sent in 2-nd and 3-rd association groups (S1 associations)
Parameter determines, which actions will not result in sending framesto association groups.
NOTE: Parameter 24 values may be combined, e.g. 1+2=3 means that associations onswitching ON or OFF the Dimmer 2 (single click) will not be sent.
Size: 1 Byte, Default Value: 0
Setting
Description
0
all actions send to association groups
1
do not send when switching on the Dimmer (single click)
2
do not send when switching off the Dimmer (single click)
4
do not send when changing dimming level (holding and releasing)
8
do not send on double click
0
all actions send to association groups
Parameter 25: Command frames sent in 4-th and 5-th association groups (S2 associations)
Parameter determines, which actions will not result in sending frames to association groups.
NOTE: Parameter 25 values may be combined, e.g. 1+2=3 means that associations onswitching ON or OFF the Dimmer 2 (single click) will not be sent.
Size: 1 Byte, Default Value: 0
