FIBARO Dimmer 2 Quick Start Manual Download

Page: 14 / 14

2021. 04. 16.

https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGD-212

14/14

Scene Activation

Switch Multilevel V3

Explanation of Z-Wave specific terms

Controller

— is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall

controllers.

Slave

— is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.

Primary Controller

— is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.

Inclusion

— is the process of adding new Z-Wave devices into a network.

Exclusion

— is the process of removing Z-Wave devices from the network.

Association

— is a control relationship between a controlling device and a controlled device.

Wakeup Notification

— is a special wireless message issued by a Z-Wave device to announces that is able to communicate.

Node Information Frame

— is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.

Z-Wave

Europe GmbH

. The product content is maintained by Z-Wave Europe GmbH , Supportteam, [email protected]. Last update of the product data: 2017-01-11

10:34:11

Summary of Contents for Dimmer 2















Search results

Summary of Contents for Dimmer 2

Reviews:

Related manuals for Dimmer 2

Brands by name

Popular brands

FIBARO Dimmer 2, Quick Start Manual

Search results

Summary of Contents for Dimmer 2

Reviews:

Related manuals for Dimmer 2

Brands by name

Popular brands