Fiat X2-50 Cab, Owner'S Manual

Page: 99 / 124

108
Equipment Details
CASSETTE C-200 CW AND C-200 CWE
The toilet section of the C-200 includes a
rotatable bowl, removable seat and cover, a
console with a flush handle/flush buttons, a
built in flush-watertank and a waste level
warning indicator. The valve blade handle is
located underneath the bowl.
PREPARING FOR USE
1. Open access door pull retaining clip
upwards (fig. 1).
2. Remove holding tank by pulling straight
out. When holding tank hits the stop, tilt
front end downwards slightly and remove
(fig. 2).
3. Position tank vertically and swivel pour
out spout upwards (fig. 3).
4. Remove the cap of the pour out spout.
Add required quantity of toilet fluid
through pour-out spout then add approx.
2 litres of water through the spout to
cover holding tank bottom. Replace cap
and return pour out spout to its original
stored position (fig. 4).
Note: Warmer weather or longer
intervals between emptying the waste
tank may require additional toilet fluid.
Use only Thetford toilet fluid to achieve
the best results.
Caution: Never add toilet fluid directly
into toilet bowl.
5. Slide the holding tank into position
through access door (fig. 5).
6. Make sure the holding tank is secured by
the retaining clip. (fig. 6).
7. Open the waterfill door and add 50 ml of
Aqua Rinse. Aqua Rinse results in a
better flush and improves the hygiene of
the toilet. Then fill the watertank with
fresh water using a jerrycan or a hose.
Tank capacity is 7 litres (fig. 7).
OPERATION
8. Turn the bowl in the most comfortable
position (fig. 8).
9. C-200 CW only: Before using the toilet it
is recommended to flush some water
into the bowl by lifting and pressing down
the flush handle (fig. 9).
9a. C-200 CWE only: Before using the toilet
it is recommended to flush some water
into the bowl by pressing and releasing
the flush button (fig. 9a).
8 7
1 2
3 4
5 6
9 9a