Fiat X2-50 Cab, Owner'S Manual

Page: 108 / 124

Equipment Details
117
OMNISTEP DOUBLE STEP
OPERATION
Press the “step out” key to bring the step
out until it reaches the end of its run or
comes up against an obstacle. The step
does not come out if the the engine is
running. Press the “step in” key to take the
step back until it reaches the end of its run
or comes up against an obstacle. The step
goes back in automatically when the engine
is running. In this situation the buzzer sounds
until the step is fully closed.
Never mount the step if retracted or if
not fully extended
MAINTENANCE
Dirt and frost can prevent the step from
operating properly. In this case the moving
parts should be cleaned or defrosted. All
points of movement are layered in
maintenance-free bearings.
IN CASE OF ELECTRICAL BREAK DOWN
If the step does not retract by motor:
- Loosen the square connection according to
fig. 2 (actions 1, 2 and 3), push the
footboard in (4) and tie it to the frame
(fig. 3).
CURRENT DRAWN
- 7 A. When fully extended or retracted: 19 A
Fig. 1
Fig. 2
Fig. 3