Equipment Details
76
Note:
If the operating display fails to light up
( it lights up “red” at AES models ) the device
is not in operation. (See troubleshooting
section).
Mains power
This option should only be selected where
the supply voltage of the connection for
power supply corresponds to the value
specified on the data plate. Any difference in
values may result in damage to the
appliance.
1. Set energy selector switch (A) to 230V .
2. Operating display "C", 230V lights
"green".
Appliance is in function.
3. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
Note:
If the operating display fails to light up
(it lights up "red" at AES models) the device
is not in operation. (For troubleshooting see
page 74)
GAS OPERATION
• The refrigerator should only be operated
using liquid gas (propane, butane). Do not
use town gas or natural gas.
• If the refrigerator is operated during travel
using gas, the precautions stipulated by
the legislation in the respective country
must be taken (in conformity with the
European standard EN 732).
• Operating the refrigerator with gas is not
permitted during travel in France and
Australia.
• As a basic rule, operation using gas is
prohibited in petrol stations.
1. Open the valve of the gas cylinder
2. Open the shut-off valve to the gas supply.
3. Set energy selector switch (A) to gas
4. Set rotary switch (B) to "MAX" position.
The ignition process is activated
automatically, accompanied by a ticking
sound approx. 30 sec. Upon successful
ignition, the display LED (C) "Gas" lights
yellow. The refrigerator is in function. Use
rotary switch (B) to regulate the temperature
in the main refrigerator compartment.
GAS FAULTS
In the event of a gas fault (e.g. gas cylinder
empty), the operating display (C) flashes
yellow.
Remedies:
Set the energy selector switch (A) to
position "OFF".
1. Is there any gas in the gas bottle?
2. Is the gas bottle valve open?
3. Is the on-board shut-off valve open?
4. Set the main switch (A) to "on"
The re-ignition starts again.
Summary of Contents for X2-50 Cab
