Equipment Details
93
• It is prohibited to use gas to power the
refrigerator while you are driving.
• It is prohibited to use gas to power the
refrigerator in the vicinity of petrol
stations.
Auto mode
The system will select gas operation if:
- mains voltage (230V) is unavailable;
- the vehicle's engine is not running.
Once mains voltage (230V) is available again
or the vehicle's engine is running, the system
will switch to the available energy source
that has the highest priority if the fridge is in
Auto mode.
If the refrigerator switches from 12V DC to
gas operation when it is in auto mode, the
system will wait for about 15 minutes before
igniting the gas. During this time, however,
the gas indicator lamp will come on. The
delay is built in to avoid it switching to gas
operation whenever you stop to refuel your
vehicle. You can cancel the delay by
immediately switching the refrigerator off and
then on again.
If the system selects gas operation, the
ignition will be activated automatically. The
gas will flow to the burner and be lit by the
electric ignition. If the flame goes out, the
gas will immediately be lit again.
Selecting gas operation manually
If the flame cannot be lit within 30
seconds, the gas supply will stop and gas
mode will be switched off. The LED start
flashing every second and an error code
is shown in the LCD display
.
The gas mode can be reset only if the
refrigerator is switched off. If you switch the
refrigerator on again and the gas mode is
still not working, the LED of the manual gas
mode will flash to indicate that gas is
unavailable and an error code is shown in
the LCD display.
Important!
It is prohibited to use gas to
power the refrigerator while you are driving.
If a road accident results in a fire, there is a
danger of explosion. It is prohibited to use
gas to power the refrigerator in the vicinity of
petrol stations. If it takes longer than 15
minutes to refuel your vehicle, you should
switch the refrigerator off using the main
switch (A).
Switching off the refrigerator
•
Push the main switch (A).
•
The blue LED will go out.
• The refrigerator is now completely
switched off.
• Use the special storage latch on the door
locking mechanism to fixate the open
door. This prevents unpleasant odours
and mould in the refrigerator.
MAINTENANCE
Regular maintenance is necessary to ensure
the correct functioning of your refrigerator.
Cleaning
Tip!
A good time to clean your refrigerator is
straight after you have defrosted it.
• Clean the refrigerator with a soft cloth
and mild detergent.
• Dust the refrigerator with a soft,
moistened cloth.
• Use a brush or soft cloth to remove once
a year any dust from the condenser at
the inside of the refrigerator.
Important!
- Do not use soap or aggressive
detergents that are abrasive or soda-based.
•
The removable interior components of the
refrigerator are not dishwasher proof.
Defrosting
Frost will gradually build up on the
condenser of the refrigerator. You should
defrost the refrigerator as soon as the frost
layer is about 3 mm thick. Frost reduces the
refrigerating capacity and life of your
refrigerator.
•
Remove the ice cube tray and all food.
•
Switch off the refrigerator.
•
Leave the refrigerator door open.
Summary of Contents for X2-50 Cab
