Fiat TIPO 5DOOR Owner'S Handbook Manual Download Page 292

Page: 292 / 304

IMPORTANT INFORMATION AND RECOMMENDATIONS

WARNING

INTERIOR FITTINGS

Do not travel with the storage compartment open: it may injure the front seat occupants in the event of an accident.

The cigar lighter gets extremely hot. Handle it carefully and make sure that children don’t use it: risk of fire and/or burns.

Do not use the ashtray as a waste paper basket: it may catch fire in contact with cigarette stubs.

ROOF RACK/SKI RACK

Before driving, make sure that the transversal bars have been fitted properly.

ENVIRONMENTAL PROTECTION SYSTEMS

The catalytic converter and particulate filter (DPF) reach very high temperatures during operation. Therefore do not park the

vehicle on flammable materials (e.g. grass, dry leaves, pine needles, etc.): fire hazard.

FUEL

Modifications or repairs to the supply system that are not carried out correctly or do not take the system technical

specifications into account can cause malfunctions leading to the risk of fire.

IMPORTANT

ROOF RACK/SKI RACK

Never exceed the maximum permitted loads (see the "Weights" paragraph in the "Technical specifications" chapter).

Fully comply with the regulations in force concerning maximum clearance.

IMPORTANT

THE KEYS

Used batteries may be harmful to the environment if not disposed of correctly. They must be disposed of as specified by law

in the special containers or taken to a Fiat Dealership, which will take care of their disposal.

290

Summary of Contents for TIPO 5DOOR

















































































































































































































































































































Search results

Summary of Contents for TIPO 5DOOR

Reviews:

Related manuals for TIPO 5DOOR

Brands by name

Popular brands

Fiat TIPO 5DOOR, Owner'S Handbook Manual

Search results

Summary of Contents for TIPO 5DOOR

Reviews:

Related manuals for TIPO 5DOOR

Brands by name

Popular brands