Fiat Qubo Owner'S Handbook Manual Download Page 52

Page: 52 / 196

What it means

What to do

amber

FUEL RESERVE

The warning light switches on when the ignition key is

turned to MAR, but it should switch off after a few

seconds. The warning light turns on when about 6 - 7

litres of fuel are left in the tank.

The triangle on the right side of the symbol

indicates the side of the vehicle with the fuel filler.

The warning light will blink to indicate a system fault. If

this is the case, go to a Fiat Dealership to have the

system checked.

amber

PLUG PREHEATING (Multijet versions) - PLUG

PREHEATING FAULT (Multijet versions)

Glow plugs

(Multijet versions)

This warning light switches on when the key is turned

to MAR. It will switch off as soon as the glow plugs

have reached a preset temperature.

IMPORTANT At high ambient temperatures the
warning light may stay on for an extremely short time.

Start the engine as soon as the warning light switches

off.

Glow plug preheating failure

(Multijet versions)

The warning light flashes if there is a fault in the

preheating system.

On some versions the display shows the dedicated

message.

Contact a Fiat Dealership as soon as possible.

KNOWING

THE

INSTRUMENT

ANEL

Summary of Contents for Qubo





































































































































































































Search results

Summary of Contents for Qubo

Reviews:

Related manuals for Qubo

Brands by name

Popular brands

Fiat Qubo, Owner'S Handbook Manual

Search results

Summary of Contents for Qubo

Reviews:

Related manuals for Qubo

Brands by name

Popular brands