Fiat Qubo, Owner'S Handbook Manual

Page: 118 / 196

REPLACING AN
INTERIOR BULB
For the type of bulb and relevant power
rating, see “Changing a bulb”.
FRONT CEILING LIGHT
Roof light with movable lens
To replace the bulbs, proceed as
follows:
extract the ceiling light A fig. 143 by
operating in the points shown by the
arrows;
open the lid B fig. 144 as shown;
remove bulb C fig. 144 by releasing
it from the side contacts, then insert the
new bulb and make sure it is correctly
clamped between these contacts;
close the lid and secure the ceiling
light into its housing, making sure it
locks properly into place.
Front ceiling light with map reading
lights
(for versions/markets, where provided)
To replace the bulbs, proceed as
follows:
operate in the points indicated by
the arrows and remove light A fig. 145;
open protective flap B fig. 146;
replace the bulbs C releasing them
from the side contacts making sure that
the new bulbs are correctly secured
between the contacts;
re-close the lid B fig. 146 and secure
light A fig. 145 into its housing locking
it properly.
141
F0T0104
142
F0T0105
143
F0T0106
144
F0T0458
116
IN
AN
EMERGENCY