Fiat Qubo Owner'S Handbook Manual Download Page 60

Page: 60 / 196

WARNING

10)

If, when the ignition key is turned to MAR, the

warning light does not switch on, switches on constantly or flashes when driving (on

certain versions together with the message on the display), contact a Fiat Dealership as soon as possible. The operation of the warning
light

may be checked by traffic police using appropriate equipment.Comply with the laws and regulations of the country where you are

driving.

11)

The presence of water in the fuel supply circuit may cause severe damage to the injection system and irregular engine operation. If the

warning light switches on (on some versions together with the dedicated message on the display), contact a Fiat Dealership as soon as

possible to have the system bled. If the warning appears immediately after refuelling, water may have entered the tank: turn the engine off
immediately and contact a Fiat Dealership.

Green warning lights

What it means

What to do

green

SIDE LIGHTS - FOLLOW ME HOME

Side lights

The warning light switches on when the side lights are

activated.

Follow me home

The warning light will turn on when this device is active

(see the “Follow me home device” paragraph in the

“Know your vehicle” section). The display shows the

dedicated message.

green

LEFT-HAND DIRECTION INDICATOR (blinking)

The warning light switches on when the direction

indicator control stalk is moved downwards or,

together with the right direction indicator, when the

hazard warning light button is pressed.

KNOWING

THE

INSTRUMENT

ANEL

Summary of Contents for Qubo





































































































































































































Search results

Summary of Contents for Qubo

Reviews:

Related manuals for Qubo

Brands by name

Popular brands

Fiat Qubo, Owner'S Handbook Manual

Search results

Summary of Contents for Qubo

Reviews:

Related manuals for Qubo

Brands by name

Popular brands