Fiat 2013 Ducato 250, Owner'S Handbook Manual

Page: 67 / 331

Holding down the buttons 5 or 7 will move the digits
on the clock forwards or backwards faster.
Reading the current time fig. 59
To read the current time, press button 4: the time
will appear on the display for about 10 seconds
and warning light 9 will come on at the same time.
Programming the switching on time fig. 60
Activation can be programmed with an advance
of between 1 minute and 24 hours. Three different
activation times may be selected, but only one can be
activated for each pre-heating cycle.
To program the activation time:
❒
press button 6: the symbol 10 or the time set
previously and the number 3 corresponding to the
preselection recalled will light up in the display
for 10 seconds.
IMPORTANT If you wish to recall other preselected
times, press button 6 from time to time within 10
seconds.
– within 10 seconds, press the buttons 5 or 7 to
select the desired switching on time.
IMPORTANT The confirmation that the time has
been memorised is given by:
❒
the disappearance of the switching on time;
❒
the presence of the preselection number 3;
❒
the lighting of the display.
IMPORTANT When the boiler comes on:
❒
the flame warning light 1 switches on in the
display;
❒
the preselection number 3 goes out.
fig. 59
F0N0153
fig. 60
F0N0154
63
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX