Fiat 2013 Ducato 250, Owner'S Handbook Manual

Page: 32 / 331

The “Trip B” function may be disabled
(see “Activating Trip B”).“Range” and
“Instant consumption" parameters cannot
be reset.
Values displayed
External temperature
Indicates the temperature outside the vehicle
passenger compartment.
Range (for versions/markets where provided)
This value shows the distance that the car can still
cover before needing fuel, assuming that driving style
is unvaried. “- - - -” will appear on the display in
the following cases:
❒
range value lower than 50 km (or 30 mi)
❒
vehicle is left parked with the engine running for a
long time.
IMPORTANT The range can be affected by several
factors: driving style (see “Driving style” in the
“Starting and driving” section), type of route
(motorway, towns and cities, mountain roads, etc…),
conditions of use (load, tyre pressures, etc…). Trip
planning must therefore take the above into account.
Distance covered
Shows the distance covered since the start of the
new journey.
Average consumption (for versions/markets, where
provided)
Shows the approximate average fuel consumption
since the start of the new journey.
Instantaneous consumption (for versions/markets, where
provided)
This value shows the fuel consumption. The value is
constantly updated. The display will show “- - - -”
if the car is parked with the engine running.
Average speed
This shows the average car speed as a function of the
overall time elapsed since the start of the new
mission.
Trip time
Shows the time elapsed since the start of a new
journey.
IMPORTANT If there is no information, the Trip
computer displays "----" in place of the value. When
normal operating conditions are restored, the
counting of the various values is resumed, without
either zeroing the values displayed prior to the
problem, or starting a new mission.
28
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX