Fiat 2013 Ducato 250, Owner'S Handbook Manual

Page: 166 / 331

Installation diagram for Van versions fig. 164
The tow hook structure must be fastened in the
points shown by the symbol Ø using a total of 6
M10x1.25 screws and 4 M12 screws.
The internal back plates must be at least 5 mm thick.
MAX LOAD ON BALL: 100/120 kg according to
the payload (see “Weights” table in the “Technical
data” section).
WARNING
After fitting, screw holes must be sealed
to prevent a exhaust gas inlet.
To install a tow hook, the bumpers must be trimmed
as described in the supplier's installation kit.
Installation diagram for Truck and Chassis Cab
versions fig. 165
Another tow hook specific to Truck and Chassis Cab
versions in shown in fig. 165.
The structure Ø must be fixed in the points
indicated using a total of 6 M10x1.25 screws and 4
M12 screws.
MAX LOAD ON BALL: 100/120 kg according to the
payload (see “Weights” table in the “Technical data”
section).
WARNING
After fitting, the screw holes must be
sealed to prevent exhaust gas from
entering.
162
KNOWYOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX