How To Use The
Bluetooth Audio System
Switching To Bluetooth Audio
Mode
To listen to music or voice audio
recorded to a Bluetooth audio device,
switch to the Bluetooth audio mode
to operate the audio device using the
audio system control panel.
Any Bluetooth audio device must be
paired to the vehicle's Bluetooth unit
before it can be used.
Refer to “Bluetooth Preparation”.
Proceed as follows:
1. Turn on the Bluetooth audio device's
power.
2. Switch the ignition to ACC or ON.
Make sure that the music note symbol
is displayed in the audio display. The
symbol is not displayed if an un-paired
Bluetooth audio device is being used
or the vehicle's Bluetooth unit has a
malfunction.
Note:
Some Bluetooth audio devices
need a certain amount of time before
the music note symbol is displayed.
3. Press the MEDIA button to switch to
the Bluetooth audio mode and start
playback.
If The Current Device Version Is
Lower Than Avrcp Ver. 1.3:
“BT Audio” is displayed.
If the current device is AVRCP Ver. 1.3,
the playback time is displayed.
Note:
If the Bluetooth audio device does
not begin playback, press the
Play/Pause button.
If a call is received on a hands-free
mobile phone during playback from the
Bluetooth audio device, the playback
is stopped. Playback from the
Bluetooth audio device resumes after
the call ends.
Playback
To listen to a Bluetooth audio device
over the vehicle's speaker system,
switch the mode to Bluetooth audio
mode.
To stop playback, press the
Play/Pause button (Four).
Press the button again to resume
playback.
Selects The Next File (Track)
Short-press the track up button
.
Selects The Beginning Of The
Current File (Track)
Short-press the track up button
.
Fast-Forward/Reverse (AVRCP
Ver. 1.3)
Fast-Forward
Press and hold the fast-forward
button
.
Reverse
Press and hold the reverse down
button
.
Switching The Display (Only
AVRCP Ver. 1.3)
The information displayed on the audio
display changes as follows each time
the text button (Three) is pressed during
playback.
45
FIAT
Radio
3.0
