12. Say: [Beep] “Yes” or “No”.
13. If “Yes”, go to Step 14. If “No”, the
procedure returns to Step 9.
14. Prompt: “Your new pairing code is
YYYY. Use this pairing code when
pairing devices to the Hands free
system. Do you want to pair a device
now”?
15. Say: [Beep] “Yes” or “No”.
16. If “Yes”, the system switches to the
device registration mode. If “No”, the
system returns to standby status.
Device Pairing
To use Bluetooth Hands-Free, the
device equipped with Bluetooth has to
be paired to the Bluetooth unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and
Bluetooth audio devices can be paired
to one vehicle.
Note:
If a Bluetooth device has already
been paired to the vehicle as a
Bluetooth audio device, it does not
need to be paired again when using the
device as a hands-free mobile phone.
Conversely, it does not need to be
paired again as a Bluetooth audio
device if it has already been paired as a
hands-free mobile phone.
1. Activate the Bluetooth application of
the device.
Note:
For the operation of the device,
refer to its instruction manual.
2. Press the pick-up button or talk
button with a short press.
3. Say: [Beep] “Setup”.
4. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, pass code, select phone
or select music player”.
5. Say: [Beep] “Pairing options”.
6. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code”.
7. Say: [Beep] “Pair”.
8. Prompt: “Start the pairing process on
your Bluetooth device. Your pairing
code is 0000 (XXXX). Input this on your
Bluetooth device when prompted on
the device. See device manual for
instructions”.
9. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
Note:
For the operation of the device,
refer to its instruction manual.
10. Select “124 Spider” from the device
list searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: “Please say the name of the
device after the beep”.
13. Say: [Beep] “XXXX - - -” (Say a
“device tag”, an arbitrary name for the
device.) Example: “Stan's device.”
Note:
Say a paired “device tag” within
10 seconds. If more than two devices
are to be paired, they cannot be paired
with the same or similar “device tag”.
14. Prompt: “XXXXXX - - - (Ex. “Stan's
device”) (Device tag). Is this correct”?
15. Say: [Beep] “Yes”.
16. Prompt: “Pairing complete”.
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again,
or by activating Bluetooth Hands-Free
first after switching the ignition from
OFF to ACC, the system reads out
a voice guidance, “XXXXXX - - - (Ex.
“Stan's device”) (Device tag) is
connected”.
Note:
When the pairing is completed, the
symbol is displayed.
Some Bluetooth audio devices
need a certain amount of time before
the symbol is displayed.
Device registration can also be
done by operating the audio unit.
24
FIAT
Radio
3.0
