When Voice Recognition Learn-
ing Is Done For The First Time
1. Press the pick-up button or talk
button with a short press.
2. Say: [Beep] “Voice training”.
3. Prompt: “This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hang-up button to cancel at
any time”.
4. Press the talk button with a short
press.
5. The voice guidance reads out the
voice input command number
(Ex. “Please read phrase one” ).
6. Say: [Beep] “0123456789” (Say the
voice input command for voice
recognition learning [one to eight]
according to the voice guidance).
7. Prompt: “Speaker enrollment is
complete.”
Note:
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.
Voice Recognition Re-Learning
If voice recognition learning has already
been done.
1. Press the pick-up button or talk
button with a short press.
2. Say: [Beep] “Voice training”.
3. Prompt: “Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain”?
4. Say: [Beep] “Retrain”.
5. Prompt: “This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hang-up button to cancel at
any time”.
6. Press the talk button with a short
press.
7. The voice guidance reads out the
voice input command number
(Ex. “Please read phrase 1”).
8. Say: [Beep] “0123456789” (say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance).
9. Prompt: “Speaker enrollment is
complete”.
Note:
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.
Voice Input Command List For
Voice Recognition Learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
correctly and naturally. (For example,
“1234” must be read out “one, two,
three, four” not “twelve, thirty four”).
Do not read out parentheses. “(” and
hyphens “-” are used for separating
numbers in a phone number.
Ex. “(888) 555-1212” must be spoken
“Eight, eight, eight, five, five, five, one,
two, one, two.”
Phrase
Command
1
0123456789
2
(888) 555-1212
3
Call
4
Dial
5
Setup
6
Cancel
7
Continue
8
Help
36
FIAT
Radio
3.0
