5. Prompt: “XXXXXXXXXXX. (Telephone
number) After the beep, continue to
add numbers, or say Go-Back to
reenter the last entered numbers, or
press the Pick-Up button to execute
dialing”.
6. (Dialing) Press the pick-up button or
say “Dial”, then go to next step.
Adding/inputting telephone
number)
Say, “XXXX” (desired telephone
number), then go to previous step.
(Telephone number correction)
Say, “Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed”. Then go back to
Step 3.
7. Prompt: “Dialing”.
Making A Call Using The Phone-
book
Proceed as follows:
1. Press the talk button with a short
press.
2. Say: [Beep] “Call”.
3. Prompt: “Name please”.
4. Say: [Beep] “XXXXX... (Ex. “John's
phone” and say a voice tag registered
in the phonebook).
5. Prompt: “Calling XXXXX... (Ex.
“John's phone”) XXXX (Ex. “at home”).
Is this correct?” (voice tag and phone
number location registered in
phonebook).
6. Say: [Beep] “Yes”.
7. Prompt: “Dialing”.
Redialing Function
Proceed as follows:
1. Press the talk button with a short
press.
2. Say: [Beep] “Redial”.
3. Prompt: “Dialing”.
Ending The Current Call
Press the hang-up button during the
call.
DTMF (Dual Tone
Multi-Frequency Signal)
Transmission
This function is used when transmitting
DTMF via the user's voice.
The receiver of a DTMF transmission is
generally a home telephone answering
machine or a company's automated
guidance call center (when you send
tone signals back according to the
voice guidance recording).
Proceed as follows:
1. Press the talk button with a short
press.
2. Say: [Beep] “XXXX... send” (Say
DTMF code).
3. Prompt: “Sending XXXX... (DTMF
code)”.
43
FIAT
Radio
3.0
