Depending on the device, the
registration status may be lost after a
certain period of time. If this occurs,
repeat the entire process from Step 1.
Registered Device Read-Out
Bluetooth Hands-Free can read out the
devices registered to its system.
Proceed as follows:
Caution!
Do this function only when parked. It is too
distracting to attempt while driving and
you may make too many errors to be
effective.
1. Press the pick-up button or talk
button with a short press.
2. Say: [Beep] “Setup”.
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, pass code, select phone
or select music player”.
4. Say: [Beep] “Pairing options”.
5. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code”.
6. Say: [Beep] “List”.
7. Prompt: “XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C)” (The voice guidance reads
out the device tags registered to the
hands-free system).
Press the talk button with a short press
during the read-out at the desired
device, and then say one of the
following voice commands to execute
it.
1. “Select phone”: Selects device
(Mobile phone) when the talk button is
short-pressed.
2. “Select music player”: Selects device
(Music player) when the talk button is
short-pressed.
3. “Edit”: Edits device when the talk
button is short-pressed.
4. “Continue”: Continues the list
readout.
5. “Delete”: Deletes the registered
device when the talk button is short
pressed.
6. “Previous”: Returns to the previous
device in read-out when the talk button
is short pressed.
7. Prompt: “End of list, would you like to
start from the beginning?”
8. Say: [Beep] “No”
9. Prompt: “Returning to main menu.”
Device Selection
If several devices have been paired, the
Bluetooth unit links the device last
paired. If you would like to link a
different paired device, it is necessary to
change the link.
The order of device priority after the link
has been changed is maintained even
when the ignition is switched off.
Hands-Free Phone
Proceed as follows:
1. Press the pick-up button or talk
button with a short press.
2. Say: [Beep] “Setup”.
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, pass code, select phone
or select music player.”
4. Say: [Beep] “Select phone”
5. Prompt: “Please say the name of the
device you would like to select.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C). Which device
please?”
6. Say: [Beep] “XXXXX... (Ex. Device B)”.
7. Prompt: “XXXXX... (Ex. Device B). Is
this correct?”
8. Say: [Beep] “Yes” or “No”.
25
FIAT
Radio
3.0
