FIAP Universalfütterer
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. WEEE-Reg. Nr.: DE78152045
7
FIAP GmbH, Jakob Oswald Str. 16, 92289 Ursensollen
Tel: 09628 9213 0; Fax: 09628 9213 30;
www.fiap.com
GB
Information about this operating manual
Please read the operating instructions and familiarise yourself with the unit prior to using it for the first
time. Adhere to the safety information for the correct and safe use of the unit.
Intended use
FIAP Universalfütterer, called in the further device is intended for use as fish feed machine. This feeder
is specifically designed for pond fish to the fish feed 1 - 4x at set times and administered in fixed
amounts automatically. Regular feeding is the key to a healthy and long life fish.
Use other than that intended
Danger to persons can emanate from this unit if it is not used in accordance with the intended use and
in the case of misuse. If used for purposes other than that intended, our warranty and operating permit
will become null and void.
CE Manufacturer’s Declaration
We declare conformity in the sense of the EC directive, EMC directive (89/336/EEC) as well as the low
voltage directive (73/23/EEC). The following harmonised standards apply: EN 61058-1, EN 60669-2-1,
EN 55014, EN 55015, EN 61000-3-2, EN 61000-3-3.
Safety information
FIAP has manufactured this unit according to the highest quality standards and the valid safety
regulations. Despite of the above, hazards for persons and assets can emanate from this unit if it is
used in an improper manner or not in accordance with its intended use, or if the safety instructions are
ignored.
For safety reasons, children and young persons under 16 years of age as well as persons, who
cannot recognise possible danger or who are not familiar with these operating instructions, are
not permitted to use the unit!
Please keep these operating instructions in a safe place! Also hand over the operating instructions
when passing the unit on to a new owner. Ensure that all work with this unit is only carried out in
accordance with these instructions. The combination of water and electricity can lead to danger for life
and limb, if the unit is incorrectly connected and misused.
Do not use the unit in or under water. Never open the unit housing or its attendant components, unless
this is explicitly mentioned in the operating instructions. Compare the electrical values of the power
supply with those on the type plate on the packing or on the unit itself. For your own safety, consult a
qualified electrician when you have questions or encounter problems! Protect the connection cable
when burying to avoid damage. Only use cables approved for outside use. Protect the plug connection
from moisture.
FIAP Universalfütterer
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. WEEE-Reg. Nr.: DE78152045
8
FIAP GmbH, Jakob Oswald Str. 16, 92289 Ursensollen
Tel: 09628 9213 0; Fax: 09628 9213 30;
www.fiap.com
Assembly and installation
(1) housing of the feeder
(2) coverage of the feeders
(3) food control & battery cover
(4) Programming buttons
(5) Battery Slots
(6) feeding bucket (on ground)
(7) feeding the output (ground)
(8) mounting plate
(9) Hanging loop
Explanation of the key of the FIAP premiumactive FEEDING HOUSE
Mode button:
This key is the local time and feeding time can be set.
Set button:
After you press the Mode button, you can change with the set button the displayed time.
"+" Button:
After pressing the Set button, the flashing icon in each affected (either time or feeding mode) and can
be made with the "+" key to a higher number.
Manual Button:
Direct manual feeding, whenever you want. To test the device can also be used.
