FIAL 2314, Manual

Page: 58 / 64

Model 2314/2316 SNMP Alarm Encoder
52 2314/2316-042315 Fial Incorporated
8 I/O Connector Pin Designations
Left Column: 50-pin CHAMP (AMP) front-panel connector
Right Column: 66M Block pins numbered top to bottom (not the telco pairing/numbering)
Table 5. 2314/2316 I/O Connector Pin Assignment
AMP
50-pin Connection
66
Block#
26 Alarm Input 1
1
1 Alarm Input 2
2
27 Alarm Input 3
3
2 Alarm Input 4
4
28 Alarm Input 5
5
3 Alarm Input 6
6
29 Alarm Input 7
7
4 Alarm Input 8
8
30 Alarm Input 9 (2316)
9
5 Alarm Input 10 (2316)
10
31 Alarm Input 11 (2316)
11
6 Alarm Input 12 (2316)
12
32 Alarm Input 13 (2316)
13
7 Alarm Input 14 (2316)
14
33 Alarm Input 15 (2316)
15
8 Alarm Input 16 (2316)
16
34 Station Gnd (Alm)
)
17
9 Station Gnd (Alm)
)
18
35 Analog Input 1
19
10 Analog Input 2
20
36 Analog Input 3
21
11 Analog Input 4
22
37 Analog Input 5
23
12 Analog Input 6
24
38 Analog Input 7
25
AMP
50-pin Connection
66
Block#
13 Analog Input 8
26
39 Analog Ground
27
14 Analog Ground
28
40 +5 Volts for sensors
29
15 Expansion 1
30
41 Expansion 2
31
16 Expansion 3
32
42 Spare
33
17 Station Ground
34
43 Relay 1 N.O.
35
18 Relay 1 Common
36
44 Relay 1 N.C.
37
19 Relay 2 N.O.
38
45 Relay 2 Common
39
20 Relay 2 N.C.
40
46 Relay 3 N.O.
41
21 Relay 3 Common
42
47 Relay 3 N.C.
43
22 Relay 4 N.O.
44
48 Relay 4 Common
45
23 Relay 4 N.C.
46
49 Summary N.O.
47
24 Summary Common
48
50 Summary N.C.
49
25 Station Ground
50
See the 66M Block cut-out sheet at the end of
this manual for 50-pin to 66 block pin-outs. NOTE: The summary relay N.O contact closes
due to any alarm of CR, MJ, or MN severity. An
alarm of ST (status) severity will not close this
relay.