FIAL 2314 Manual Download | Manualshive

Page: 35 / 64

background image

Model 2314/2316 SNMP Alarm Encoder

Fial Incorporated

2314/2316-042315

29

The SNMP Notifications Page
This screen configures the unit to send SNMP V2 notifications (called Traps in SNMP V1).

To specify or edit an SNMP Manager, click the SNMP Notifications link in the left pane. The SNMP

Notifications page will appear, as shown in Figure 21.

Figure 21. SNMP Notifications Page Via The Web

The SNMP Notifications page consists of three sections. The top section displays a table that lists the
provisioning information for up to five managers that can receive notifications and perform controls on this

unit. The 2314/2316 SNMP Alarm Encoder uses the manager’s IP address and the Community string to
validate a manager that is accessing it via SNMP commands. Only managers that are listed in this table

will have access to this unit via SNMP 'set' commands. Manager information includes manager table entry
Number, Name, IP Address, Traps (either enabled or disabled), Send (either Notification or Inform

Request) and Community string. The manager must also use the same community string as listed in this
table.

Use the dialog section in the middle of the page to provision each required manager. The SNMP

Notifications page will not even be listed unless you are logged in with the administrator password.

«
...
33
34
35
36
37
...
»

Summary of Contents for 2314

































































Reviews:

No comments

Related manuals for 2314

Brand: Hama Pages: 9

Brand: Hama Pages: 10

Brand: Hama Pages: 12

Brand: Unipower Pages: 19

Brand: Xtreamer Pages: 29

Brand: Icy Box Pages: 2

RASPTOUCH ES9018K2M

Brand: Audiophonics Pages: 30

Brand: Sonifex Pages: 8

Brand: Patton electronics Pages: 7

Brand: Sencore Pages: 126

Brand: M-system Pages: 5

Brand: Fronius Pages: 135

Brand: HEIDENHAIN Pages: 36

Brand: Medialon Pages: 96

Brand: Hyundai Pages: 35

Brand: Intellinet Pages: 16

Brand: B&B Pages: 36

Brand: aqprox! Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands