manualshive.com logo in svg

FIAL 2314, Manual

Share
Download
FIAL 2314 Manual Download Page 38

Model 2314/2316 SNMP Alarm Encoder 

 

32 2314/2316-042315 

 

Fial Incorporated

 

After changing Inform-Request settings, press the Submit button.  The Submit button must be pressed to 

register any changes made on this screen.  You can submit changes from many screens before doing a 
final Save & Reboot.  To actually install the changes, click the Save & Reboot link on the left side and enter 

the administrator login name and password to confirm.   

 

Web Browser interface - Logins and Passwords 
There are three different web interface login types: Admin, Control and View.  Each login type has its own 

configurable login name and an associated password.  Both login name and password are case sensitive.   
 

Table 3.  Login Names and Passwords 

Login 

Type 

Factory default 
login name 

Factory default 
password 

Description 

Admin 

 

admin 

 

remote 

Allows provisioning and viewing of all settings in 

the SNMP Alarm Encoder.  Allows Save & 
Reboot, Configuration download/upload, and 

Firmware Upgrade.  This user may also set 
control points (relays) ON and OFF with the web 

interface. 

Control  

 

control 

 

remote 

Allows viewing of all alarms, controls, Boolean 

alarms and analog values via the web interface.  
This user may also set control points (relays) on 

and off with the web interface. 

View 

only 

 

user 

 

public 

Allows viewing-only of alarms, controls, Boolean 
alarms and analog values.  No controls 

permitted. 

 

The factory default Administrator login (admin) and password (remote) for each device should be changed 
for security reasons.  The Control user password (and optionally the Control login name) should also be 

changed; likewise, the View Only login name and password.  To change the login names and passwords, 
click the Set Login & Password link in the left pane.   

Summary of Contents for 2314

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands