FIAL 2314 Manual Download | Manualshive

Page: 21 / 64

background image

Model 2314/2316 SNMP Alarm Encoder

Fial Incorporated

2314/2316-042315

15

The Alarm Inputs Page
To provision or modify an Alarm point, click the Alarm Inputs link in the left pane. The Alarm Inputs page
will appear, as shown in Figure 14.

Figure 14. Alarm Inputs Page Via The Web

The Alarm Inputs page (as shown in Figure 14), displays the provisioning table for the 8 external alarm

points in this unit. You may have to use the thumb bar to view all alarm points. Alarm information includes
Alarm Point number, Name, current State, Severity, Service Affecting, Delay period and Inverted condition.

You need not provision points that are unused, but all 8 points are always present in the table as viewed by
an SNMP manager. Use the dialog table at the bottom of this screen to provision each alarm point. The

dialog table does not appear if the user is not logged in with administrator privileges. To provision an alarm
point, edit the following fields found at the bottom of the screen:

Edit Alarm Point: Use this drop-down box to select the alarm point you wish to edit.

Name: Enter a name for the selected alarm. Any characters are allowed in this field. Alarm names

can be the same as other alarms; however, this is not recommended for obvious reasons.
Names may be up to 29 characters long. The column width adjusts to fit the name.

Severity: Select the Severity level for the selected alarm point. The possible Severity levels are:

CR, MJ, MN, and ST. Only CR, MJ and MN generate notifications when asserted. To make

«
...
19
20
21
22
23
...
»

Summary of Contents for 2314

































































Reviews:

No comments

Related manuals for 2314

MediaLounge DSM-520

Brand: D-Link Pages: 2

Brand: Samsung Pages: 37

Brand: Samsung Pages: 2

Brand: Daikin Pages: 4

Brand: NAIM Pages: 2

Brand: Z3 Technology Pages: 86

LIMETREE USB-DAC

Brand: Lindemann Pages: 24

Vertex VCE6-HFC-4C

Brand: Spirent Pages: 8

Brand: Karma Pages: 2

Brand: Mase Pages: 22

Brand: hc-cargo Pages: 38

Brand: La Marche Pages: 32

L.O.C.PRO LP7-2

Brand: PAC Pages: 2

Sunny Island 3324

Brand: SMA Pages: 80

Brand: Samlexpower Pages: 20

Brand: Extron electronics Pages: 2

Brand: Tektronix Pages: 2

Brand: APT Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands