FHM WC8-PRO, Operations & Parts Manual

Page: 8 / 27

Farmer-Helper WC PRO Chipper 8 Revision 9/22/16
Keep everyone, especially children, away from the operation
area.
Anyone who has not read and understood this manual should not be in
the area.
6. OPERATOR PROTECTIVE GEAR
The following protective clothing and gear is recommended when using
your chipper:
EYES -- Wraparound Safety Glasses or Goggles
EARS -- Ear Plugs
HANDS -- Leather Gloves
FEET -- Steel-Toed Boots
LEGS -- Heavy Pants
ARMS -- Long-Sleeved Shirt
NO LOOSE CLOTHING SHOULD BE WORN AROUND THE
CHIPPER!
7. OPERATION CHECKLIST
CAUTION
: Turn the chipper head over by hand before applying power
to make sure that the head is clear, all the bolts are clear, and the blades
clear the case and cutter bar.
Make sure that:
The feed roll drive-shaft and pivots are properly lubricated.
The feed roll clutch is properly lubricated, and the clutch releases
when handle or foot pedal is depressed.
The PTO shaft doesn’t come apart or bottom out during the normal
lifting range.
The discharge chute is pointed in a safe direction
During and after operation, check the chipper pile to see if the blades
need to be serviced. Long slivers in the chip pile are one of the best
indications of dull blades.