8
Accessing batch and programming menu screens
Accessing batch and programming menu screens
DC voltage calibration for pumps is running
Please wait…
Calibration is successfully done.
Å
First message on touchscreen display at powerup. This shows
only at “POWER ON”, when ON/OFF. The software is analyzing
and correcting any variations as a quality control feature.
Å
FETCO home screen will display on completion
Batch selection and brew operation menu screens
FETCO home screen
Å
Tap FETCO HOME SCREEN to enter batch selection screen.
Tap left or right side batches
Æ
Hold down batch selector pennant to begin brew.
Operation screens
Programming menu screens
FETCO home screen
DC voltage calibration for pumps is running
Please wait…
Calibration is successfully done.
Å
First message on touchscreen display at powerup. This shows
only at “POWER ON”, when ON/OFF. The software is analyzing
and correcting any variations as a quality control feature.
Å
FETCO home screen will display on completion
From power
“OFF”
Æ
Turn main power switch to
“ON”
Touch screen will illuminate, and pump voltage calibration will display
When Complete: FETCO HOME SCREEN will display
Immediately
touch and hold finger to enter programming
In 5-8 seconds “PROGRAMMING” screen will appear
Æ
MAIN POWER SWITCH
Located to lower right
side of back panel
Touchscreen
