9
6 Electrical
connection
WARNING
Risk of accident if the machine is operated us-
ing unauthorised voltages or frequencies.
The mains voltage and the frequency of the
power source must correspond with the
specifi cations on the machine’s name plate.
In North America, only Festool machines with
voltage specifi cations of 120 V may be used.
CAUTION
Risk of injury, electric shock
Never connect the plug to an unearthed
socket.
Always use extension cables with a protective
earth conductor.
The switch/connector unit [4-1] activates the
power supply and switches the electric pow-
er tool installed in the MFT/3-VL on and off.
Insert the plug [4-5] into an earthed socket.
Connect the electric power tool installed in the
MFT/3-VL to the plug [4-4].
Press the green button [4-2] to switch ON.
Press the red button [4-3] to switch OFF.
The switch/connector unit is fi tted with a zero
voltage actuator which prevents the power from
being restored automatically when the power
supply is interrupted (e.g. after a power failure).
After an interruption in the power supply, press
the green button to switch the machine ON.
7 Accessories
For your own safety, use only original Festool ac-
cessories and spare parts. The accessory and tool
order number can be found in the Festool cata-
logue or on the Internet under “www.festool.com”.
Customer service and repair.
Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at:: www.festool.com/Service
EKAT
1
2
3
5
4
Use only original Festool spare parts!
Order No. at: www.festool.com/Service
8 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible recy-
cling centre! Observe the valid national regulations.
EU only:
In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
Summary of Contents for MFT/3-VL
Page 4: ...1 2 1 1 1 2 ...
