9
* Speed specifications with fully charged battery
pack.
** The maximum speed is reduced in the lower
torque stages.
Functional description
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold out
this page for having always an overview of the ma-
chine.
Intended use
Cordless drills are suitable for drilling into metal,
wood, plastics and similar materials as well as in-
serting and tightening screws.
The charger TRC 3 is designed for charging the bat-
tery packs listed.
Charger
TRC 3
Mains voltage (input)
120 V ~
Mains frequency
60 Hz
Charging voltage (output)
7.2 - 18 V=
Rapid charging
max. 3 A
Conservation charging current, pulsating (only NiCd, NiHM)
approx. 0.06 A
Charging times for
LiIon 1.5 Ah/ 3.0 Ah, 80 %
approx. 25/ 55 min
LiIon 1.5 Ah/ 3.0 Ah, 100 %
approx. 35/ 70 min
Permitted charging temperature range
-5 °C to +45 °C
Temperature monitoring
via NTC resistor
Battery pack
BPC 12 Li - 1.5 Ah BPC 12 Li - 3.0 Ah BPC 15 Li - 3.0 Ah
Voltage
10.8 V
10.8 V
14.4 V
Capacity
1.5 Ah
3.0 Ah
3.0 Ah
Weight
0.31 kg (0.68 lbs.) 0.49 kg (1.08 lbs.) 0.58 kg (1.50 lbs.)
[1-1]
Torque thumbwheel
[1-2]
Bit store
[1-3]
LED lamp
[1-4]
Gear switch
[1-5]
Drilling symbol
[1-6]
Screwdriving symbol
[1-7]
Drilling/Fastening selector switch
[1-8]
Right/left switch
[1-9]
On/Off switch
[1-10]
Capacity display
[1-11]
Belt clip
[1-12]
Buttons for releasing the battery pack
WARNING
The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.
Summary of Contents for C 12 Li
Page 2: ......
Page 3: ......
Page 4: ...1 1 1 1 2 1 3 1 4 1 5 1 7 1 6 1 8 1 9 1 11 1 12 1 10 ...
Page 5: ......
