Festo VTSA-F-CB Manual Download Page 21

Page: 21 / 106

Festo — VTSA-F-CB — 2021-06a

Product overview

Variants of the pressure regulator plates

ID code

Circuit symbol

Description

Control
range [bar]

Pressure regulator plate for port (1) (P-regulator)

ZA, ZAY

–

Regulates the operating pressure in the
duct (1) upstream from the directional
solenoid valve.

–

The pressure regulator can be adjusted
in any state.

ZF, ZFY

Pressure regulator plate for port (2) (B-regulator)

ZC, ZCY

–

Regulates the operating pressure in the
duct (2) downstream from the direc-
tional solenoid valve.

–

The pressure regulator can only be
adjusted in the switched state.

ZH, ZHY

Pressure regulator plate for port (4) (A-regulator)

–

Regulates the operating pressure in the
duct (4) downstream from the direc-
tional solenoid valve.

Pressure regulator plate for ports (2) and (4) (AB-regulator)

ZD, ZDY

–

Regulates the working pressure in
ducts (2) and (4) downstream from the
directional solenoid valve.

–

The pressure regulator can only be
adjusted in the switched state.

ZI, ZIY

Tab. 16: Variants of the pressure regulator plates

Summary of Contents for VTSA-F-CB










































































































Search results

Summary of Contents for VTSA-F-CB

Reviews:

Festo VTSA-F-CB, Manual, Page: 21 / 106

Search results

Summary of Contents for VTSA-F-CB

Reviews: