Festo SEC-ST-48-6-P01, Fitting And Installation Instructions

Page: 54 / 56

A. Technical appendix
A-3
Festo SEC-ST-48-6-P01-EN en 0111NH
A.1 Technical specifications
A.1.1 SEC-ST-48-6-P01
SEC-ST-48-6-P01
Part number 530 069
Supplier designation SMC46-4
Rated current I
n
1.25 A ~ 6 A adjustable
Rated voltage V
n
24...48 V DC
Operating mode Bipolar chopper driver
Operating mode Full step = 200 steps per revolution
Half step = 400 steps per revolution
Quarter step = 800 steps per revolution
Fifth step = 1000 steps per revolution
Eighth step = 1600 steps per revolution
Tenth step = 2000 steps per revolution
Setting the step With the dip switch
Step frequency Max. 40 kHz
Current reduction 0 or 70 % can be selected with dip switch
Manual movement With buttons Step+ and Step-
LED Green (power), red (fault)
Button RESET, Step+, Step-, CLK Sim.
Type of connection Screw plug terminals
Method of fastening TS 35 DIN hat rail
Ambient temperature 0 ... + 40 °C (... + 50° at I < 4.7 A)
Storage temperature - 25 ... + 60 °C