Festo SEC-ST-48-6-P01, Fitting And Installation Instructions

Page: 34 / 56

3. Installation
3-3
Festo SEC-ST-48-6-P01-EN en 0111NH
3.1 Material
3.1.1 Manufacturer
Caution
Use only the cables listed below for connecting the system.
Only in this way can you guarantee the correct functioning
of the system.
Caution
Incorrectly prepared cables may damage the electronics
and trigger off unexpected movements of the motor.
Test every cable in accordance with the instructions in the
section “Fitting the cables.” Make sure that the cables are
correctly connected and that the plugs are provided with
strain-relief.
We recommend the following Festo cables for connection to
our electric positioning systems:
Cables Designation Part number
KMTR-ST-5 Motor cable 5 m 530071
KMTR-ST-10 Motor cable 10 m 530072
KMTR-ST-x Motor cable xm
(up to max. 10 m) 530073
KSPC-SECST-1.5 Control cable to SPC200 530077